Sign in
Freedom Motorworx & Fabrication
Recommendations & Reviews
About us
We are a high performance automotive repair shop that can handle all your repair and performance needs. We also specialize in custom fabrication.
Hours of operation
Monday10:00AM - 6:00PMTuesday10:00AM - 6:00PMWednesday10:00AM - 6:00PMThursday10:00AM - 6:00PMFriday10:00AM - 6:00PM
CLOSED NOW
110 recommendations and reviews from 11 people
-
Referral from
January 4, 2018
Lee E. asked:Looking for a shop in the Knoxville area that can help advise on and install a camshaft for a 2011 camaro ss with the L99 auto motor.: A dyno and sct tuner is a plus ...pfaJT G. replied:Message my shop page the l99 requires a good bit of extras beyond just a cam www.facebook.com/freedommotorworxMarc T. replied:JT Grail Freedom Motorworx & Fabrication
-
Referral from
December 27, 2017
Lily M. asked:Recommendations on a shop that can tune a ka-t?Britt G. replied:JTGrail at Freedom Motorworx & Fabrication
-
Referral from
December 9, 2017
Christopher B. asked:Looking for someone to tune my car here soon. Anyone have any recommendations that you've used personally?JT G. replied:Www.facebook.com/freedommotorworx message the shop page we can do it no problemCorey W. replied:JT Grail and Michael Smith at Freedom Motorworx & Fabrication Message the shop page for quicker response.
-
Referral from
November 21, 2017
Nate P. asked:Okay so where can I get my fwd car dyno’d? And who has the best prices. PFADavid F. replied:JT Grail Freedom Motorworx & FabricationMatthew P. replied:JT Grail all the way at Freedom Motorworx & Fabrication
-
Referral from
October 28, 2017
Glenn S. asked:Anyone know of a local shop that does LS swap harness/ECM programming?Brian T. replied:The best https://www.facebook.com/freedommotorworx/David F. replied:Freedom Motorworx & Fabrication
-
Referral from
October 13, 2017
Chris B. asked:In search of someone that can weld aluminum proficiently. I need six pieces of 1in tubing welded together. Can bring the pieces to your shop and pay cash.JT G. replied:Www.facebook.com/freedommotorworx we can do it no problemEddie F. replied:Freedom Motorworx & Fabrication
-
Referral from
October 9, 2017
Jacob M. asked:Does it make me a bad car guy if I give up on a heater core replacement? Had a great friend helping, and we were so close, then hit a wall. This, and some other factors have me looking for a shop to finish the job. Anybody know a good shop in lenoir city or surrounding area that won't break the bank? Super tight budget.Daniel E. replied:Not many people will take over in the middle of a job like this. Go to freedom motorworx & fabrication. Jt will hook you up!
-
Referral from
August 22, 2017
Chase Y. asked:Best Honda mechanic in Knoxville? Going to do a complete swap need some recommendations please.JT G. replied:Www.facebook.com/freedommotorworx message us we can help over 22 years combined experience 14 alone myselfMatthew P. replied:Definitely JT Grail at Freedom Motorworx & Fabrication
-
Referral from
May 21, 2017
Benjamin H. asked:Recommendations needed! What is a trustworthy shop that's good at building engines? Got some forged internals I need installed (oversized pistons and connecting rods as well as crankshaft) will need to be balanced and possibly need some head work done as well. Thanks in advanceEddie G. replied:Message his shop page https://www.facebook.com/freedommotorworx/
-
Referral from
May 8, 2017
Devan R. asked:Anyone know someone who could make a Y pipe to fit long tube headers for my car?JT G. replied:Well I'll have to give that one a try next winter but if you need a quote hit up my page www.facebook.com/freedommotorworxJoshua S. replied:JT Grail. Freedom Motorworx & Fabrication
-
Referral from
May 8, 2017
Kyle G. asked:My dad just bought a vette and hes looking to have the procharger set up swapped over from his silverado to his car and have it tuned. anyone have a shop they would recommend?Matthew P. replied:www.facebook.com/freedommotorworxJT G. replied:Www.facebook.com/freedommotorworx we can handle that no problem
-
Referral from
March 5, 2017
Ellen J. asked:Looking for recommendations for a shop that can do the upper and lower ball joints on my Yukon.. thanks in advance (a legit shop too, not your cousins garage)David F. replied:https://www.facebook.com/freedommotorworx/JT G. replied:Www.facebook.com/FreedomMotorworx we can take care of it for you
-
Referral from
March 29, 2018
Luis B. asked:any one know any good shops to work on Subaru’s?? my friend said wrx jumped time and riding on 2 cylinders.JT G. replied:Www.facebook.com/freedommotorworx we can certainly help out with proper diag and repair please message the shop page for info
-
Referral from
March 17, 2018
Britton R. asked:I’m in need of a garage that can install a pro charger on a 2017 camaro 2ss. And tune it.JT G. replied:Message my shop page we can help no problem and have a dyno in house. Www.facebook.com/freedommotorworx
-
Referral from
March 13, 2018
Jeramiah P. asked:Need a timing belt changed on a 2006 kia spectra everywhere I've called has been around 400$ any recommendations.JT G. replied:Www.facebook.com/freedommotorworx we can certainly do it as far as price would need to look up labor times and parts message the page for details
-
Referral from
March 6, 2018
Kesha P. asked:In Search Of Someone: Who can build a Y bridge and a cold side inter cooler tube for an LLY?JT G. replied:Www.facebook.com/freedommotorworx I can do that no problem
-
Referral from
February 20, 2018
Brandon S. asked:Who’s the best engine builder in Knoxville?JT G. replied:Message my shop page www.facebook.com/freedommotorworx with details on engine we build many different engines
-
Referral from
February 12, 2018
Aaron M. asked:So guys I’m getting a free 4.8 motor and was wondering what’s a good place to get a rotating assembly and some performance parts any help or advice would be appreciated as this will be my first ls motor thanks in advanced kceJT G. replied:Www.facebook.com/freedommotorworx we can help with anything you need
-
Referral from
February 10, 2018
Kenny B. asked:Hey guys, just moved to knoxville from Orlando, FL. What are the best shops in the area for tuning and working on my ‘17 wrx? Read some mixed reviews online for local performance shops so where do all the suby owners in this area take their cars?JT G. replied:www.facebook.com/freedommotorworx we can work on and do any install and custom fab work you may need however we do not have the ability to do any tuning on them.
-
Referral from
February 1, 2018
Brandon P. asked:Best place to get headwork done? Annnnd goJT G. replied:Www.facebook.com/freedommotorworx we have a few companies that do Cnc porting work for us have a set of cobra heads out there being worked now
-
Referral from
January 29, 2018
Greg N. asked:2 questions! What's the cheapest rental company(need a car for 6 weeks) and does anyone know of a shop that can get my k20a2 swap done sooner than 6 weeks and still be under or at 2k including parts for a o2 em2 (pretty much drop in). Current shop is estimating 6 weeks or more bc of the price. PfaJT G. replied:Www.facebook.com/Freedommotorworx message us
-
Referral from
January 16, 2018
Andrew H. asked:Looking for reputable places to have the transmission on my mk6 gti worked on?JT G. replied:www.facebook.com/freedommotorworx i have done a few gti transmission thru multiple years on the vw messaged my shop page with what you have going on
-
Referral from
January 6, 2018
Michael O. asked:ISO a tuner to throw a base tune on my truck so I can drive it ASAP it’s an 03 Silverado 5.3JT G. replied:I’ll be at the shop tomorrow message the shop page www.facebook.com/freedommotorworx
-
Referral from
December 18, 2017
Mike D. asked:I need a driveline shop that can swap out a ring and pinion and all new bearings. Shop must be familiar with a IRS set up out of a 05 Pontiac. I have all parts to do the swap/ rebuild.JT G. replied:Www.facebook.com/freedommotorworx message the page we can take care of you
-
Referral from
December 12, 2017
Eric J. asked:Who can install a turbo on my neon for a dependable price? Tag away!JT G. replied:www.facebook.com/freedommotorworx we can handle that no problem
-
Referral from
December 7, 2017
Brian I. asked:Could someone refer me to a welder / shop that could repair a aluminum rim? I may have tire off already if that makes any difference. Rim isn't that bad,but tire won't hold air. Its my only car so I needs it. ( edge automotive can't do it cause their tig isn't set up) thanksJT G. replied:Www.facebook.com/freedommotorworx send some pictures of issue
-
Referral from
December 7, 2017
Logan G. asked:Looking for suggestions on a good tuning shop in Knoxville?JT G. replied:www.facebook.com/freedommotorworx we can certainly help you out
-
Referral from
December 6, 2017
Sean R. asked:Where is the best place to get someone to tune a 2001 audi a4JT G. replied:Www.facebook.com/freedommotorworx we have a option for tuning on those
-
Referral from
November 27, 2017
Austin H. asked:Anyone on here any good at rebuilding 7ms, the one that's in my buddies turbo 89 supra is knocking bad, please tag someone who you think could do it for a decent price...pic for attentionJT G. replied:Www.facebook.com/freedommotorworx we can take care of it no problem and tuning after on our in house dyno
-
Referral from
November 12, 2017
Brooke H. asked:anybody know a good place to get my transmission done in my 97 prelude i wanna manual swap itJT G. replied:I personally have done 10 or so prelude manual swaps in the past and dozens on civics and integra message the shop page www.facebook.com/freedommotorworx
-
Referral from
November 10, 2017
Cameron J. asked:Looking for a recommendation: Where is the best place to get my 05 Mustang turbo installed and tuned?JT G. replied:Www.facebook.com/freedommotorworx we can take care of that no problem please message the shop page
-
Referral from
November 7, 2017
Alex H. asked:Looking for someone to build my ls for a reasonable cost. Wanting heads cam and tune.JT G. replied:www.facebook.com/freedommotorworx we can certainly take care of you and have a dyno in-house with years of tuning experience.
-
Referral from
October 26, 2017
Adam E. asked:Anyone know someone that welds aluminum or a shop that does?JT G. replied:www.facebook.com/freedommotorworx message the page we can certainly weld aluminum for you
-
Referral from
October 20, 2017
Carlos K. asked:Anybody in or around knoxville that can flash my ecu I need 2step also how long does it take??JT G. replied:Www.facebook.com/freedommotorworx please message the page
-
Referral from
October 8, 2017
Jonathan M. asked:Does anybody know of shops in the Knoxville area that can install a rotating assembly?JT G. replied:Www.facebook.com/freedommotorworx one of our specialties is engine assembly
-
Referral from
October 5, 2017
Omar V. asked:Somebody hook me up with a good mechanic/shop that can fix oil leaks ?? Reasonable prices.. honest work .. Pic for attentionJT G. replied:Www.facebook.com/freedommotorworx we can help you out no problem
-
Referral from
September 30, 2017
Jake C. asked:rsx dc5 type r brembos $1 - Knoxville, TN Looking for someone around knoxville who can rebuild my type r brembo calipersJT G. replied:Www.facebook.com/freedomMotorworx we can I will just need to find the right seals for them
-
Referral from
September 30, 2017
Lauren E. asked:Is there anyone in Knoxville that does oil changes on lowered vehicles? Don't really wanna go out of Knoxville. PfaJT G. replied:Www.facebook.com/freedomMotorworx
-
Referral from
September 29, 2017
Matt H. asked:Looking for a reliable, honest shop to work on a BMW. Recommendations? *edit: specifically steering/suspension and an oil change.JT G. replied:www.facebook.com/freedommotorworx we can help you out no problem message the shop page for details
-
Referral from
September 25, 2017
Mariah S. asked:Needing a Mechanic RELIABLE FREE - Alcoa, TN I'm desperately needing a RELIABLE mechanic to change the timing belt, and water pump on my 2000 Honda Civic. I have all of the parts and it hasn't failed yet. I'm just wanting to get it done as my car has 170xxx miles now. I can pay, but really wanting it reasonably priced. TIA.JT G. replied:Www.facebook.com/freedommotorworx we can get you in this week we specialize in Honda and Acura dealer quality work
-
Referral from
September 14, 2017
Chuck C. asked:Who can do a 5.3 harness and reflash the computer?JT G. replied:Www.facebook.com/freedommotorworx message us
-
Referral from
August 30, 2017
Devan V. asked:I need help tomorrow morning! I need someone to put ball joints and possibly a wheel baring on a 04 Volkswagen Jetta! Front passenger side only! Plzzz someone help!JT G. replied:Www.facebook.com/freedommotorworx we could probably fit it in
-
Referral from
August 17, 2017
Derek H. asked:any good mechanics in maryville that won't charge a ton? my girlfriends car is leaking oil and I can't figure out here from or why. it's a 94 v6 firebirdJT G. replied:Www.facebook.com/freedommotorworx message us we can take a look
-
Referral from
August 8, 2017
Will B. asked:Who can put a new Ac compressor on my car and recharge it? Need round about pricesJT G. replied:Www.facebook.com/freedommotorworx we can get you in today
-
Referral from
August 6, 2017
Kyler C. asked:Who can weld a muffler & hanger on my 350z for a reasonable price for me today? I need done asap. PFAJT G. replied:message my shop page im here today www.facebook.com/freedommotorworx
-
Referral from
August 3, 2017
Jordan P. asked:Best place/person to get coilovers installedJT G. replied:Www.facebook.com/freedommotorworx hit up the shop page we can take care of you
-
Referral from
August 3, 2017
Cory B. asked:New on here just wondering if anyone knows a tuner especially one with a dynoJT G. replied:Www.facebook.com/freedommotorworx we do not have one in house but we rent time on one locally
-
Referral from
June 27, 2017
James L. asked:Who can do a valve adjust tomorrow and how much?JT G. replied:Message my shop page www.facebook.com/freedommotorworx we can do it I'll respond when I get in in the morning around 10
-
Referral from
June 24, 2017
Kari M. asked:Hello! Need some advice. 92 honda accord Needs timing belt kit and harmonic balancer. Have been quoted $775. Anyone know a reputable shop for less?JT G. replied:Www.facebook.com/freedommotorworx message the page we specialize in Honda and Acura 14 plus years
-
Referral from
May 29, 2017
Whitney R. asked:Lookin for someone who can change my harmonic balancer on my carJT G. replied:message my shop page www.facebook.com/freedommotorworx we can take care of it for you
-
Referral from
May 9, 2017
Jacob R. asked:What's the best shop for a custom exhaust, and why?JT G. replied:www.facebook.com/freedommotorworx message the shop page
-
Referral from
May 9, 2017
Brandon C. asked:Looking for a shop or someone to drop a engine and trans in my car everything is ready! Im not wanting to pay a grand if its completely done right I may have a running vehicle to trade on.. Please tag some shop owners its a 97 eclipesJT G. replied:Message my shop page www.facebook.com/freedommotorworx
-
Referral from
May 3, 2017
Aaron G. asked:Does anyone get aem computers at wholesale or discount? In search of pn 30-6101. PfaJT G. replied:Message my shop page www.facebook.com/freedommotorworx can normally have stuff in 1-2 days
-
Referral from
April 25, 2017
Sierra J. asked:Looking for a good shop with decent prices or someone who is good with cars. Id do it myself but I dont have the time due to work and school and I need the car done with in a day or two. It needs timing chain kit put in. Water pump oil change and valve cover gaskets. Im buying all the parts and willing to pay a reasonable price for a shop or someone to do it. It will be on a 2007 maxima 3.5JT G. replied:www.facebook.com/freedommotorworx meassage the shop page try to get back to you as soon as i can pretty busy today but do my best later this evening but we can handle that no problem
-
Referral from
April 19, 2017
Scott M. asked:Best machine shop in the Knoxville area?JT G. replied:None in the area but I ship stuff out to a great shop message my shop for details www.facebook.com/freedommotorworx
-
Referral from
April 17, 2017
Nick B. asked:Anyone have a srt4 tuner or exhaust? Gauges?JT G. replied:Www.facebook.com/FreedomMotorworx can get or make anything you need
-
Referral from
April 17, 2017
Andrew C. asked:Soooo looking to put some 4.10 gears in my fox but dont really feel like doing my self. Does anyone know where i can get it done for a fair price but also reliable work around the knoxville area? ThanksJT G. replied:Www.facebook.com/FreedomMotorworx have done 100's of gear installs on the ford 8.8
-
Referral from
April 3, 2017
Justin M. asked:ISO Shop in Knox for tune/Dyno $1 - Cleveland, TN Who in Knox area is reputable? Cash in hand.JT G. replied:Www.facebook.com/freedommotorworx message page with vehicle details for quote
-
Referral from
April 3, 2017
Jonathan E. asked:Need a shop to put a clutch in a 00 honda accord i just dont have the timeJT G. replied:Www.facebook.com/FreedomMotorworx message the page can get you in this week
-
Referral from
March 15, 2017
Devan V. asked:Looking for someone who can weld my differential.. Tired of sliding one way..JT G. replied:Www.facebook.com/freedommotorworx message the shop page I have the ability to weld it properly using the proper filler metals for welding cast to mild steel
-
Referral from
March 6, 2017
Derek L. asked:Hey guys need suggestions for a good tuning shop for hondas. Need k pro but I know nothing about it or how much it costs. This is my first time swapping an engine. I have rebuilt a lot of motorcycle engines so the mechanics aren't an issue. I have read you can get different versions but I'm really just interested in using the base map from a k20z3. How much would something like that cost?pfaJT G. replied:Www.facebook.com/freedommotorworx this is one of our specialties
-
Referral from
March 1, 2017
Josh H. asked:I am looking for someone who has a garage to do a full engine and tranny install on my ek I currently do not have a location to do it so I'm stuck with paying someone no half ass jobs must have own tools a garage and like I said no half ass job very serious pm meJT G. replied:Www.facebook.com/freedommotorworx if you want it done right the first time message me only quality leaves my shop
-
Referral from
February 16, 2017
Brian K. asked:I have all the piping/parts for my stainless exhaust system but need a shop to fit/weld it together. Who do y'all recommend? I realize it's going to cost a few $$ but want it done right.JT G. replied:www.facebook.com/freedommotorworx check out the photos on the page and if you need any more detailed pictures of my stainless welding just ask
-
Referral from
February 15, 2017
Nate H. asked:anyone know of a good shop to get your car tuned and dyno, and about how much it cost?JT G. replied:Www.facebook.com/FreedomMotorworx message the page with vehicle info
-
Referral from
February 13, 2017
Matt E. asked:Anyone here know of a person or shop who can build a header for me? PM me for details. Thanks.JT G. replied:Www.facebook.com/freedommotorworx message the page
-
Referral from
February 11, 2017
Alex H. asked:Anyone know who can put some shorty headers on my goat?JT G. replied:Www.facebook.com/FreedomMotorworx message us can also get a good price on some kooks long tubes and some tuning with hp
-
Referral from
February 11, 2017
Tyler M. asked:Who does head work? Need valve stem seals replaced??JT G. replied:What engine is it and are heads off car? Message my shop page www.facebook.com/freedommotorworx
-
Referral from
February 11, 2017
Jared G. asked:Anyone on here a retailer for TEIN coilovers?JT G. replied:Www.facebook.com/FreedomMotorworx I can get you what you need
-
Referral from
February 11, 2017
Austin B. asked:Anyone know of any shops that work on 2jz motors. Got a rod that's knocking.JT G. replied:www.facebook.com/freedommotorworx we can help you out no problem hit up the page i handle all business threw there.
-
Referral from
February 11, 2017
Connor V. asked:Where is the best place to take my 2007 Si to get worked on? Probably needs timing work and a tune. Hopefully nothing too serious other than that!JT G. replied:Www.facebook.com/freedommotorworx shoot the shop a message with what you got going on I'll reply as soon as I can
-
Referral from
February 10, 2017
Jonavon S. asked:Who does the best work on turbo cars?JT G. replied:Www.facebook.com/FreedomMotorworx message us we can hook you up
-
Referral from
February 6, 2017
Sara S. asked:Where is the best place to get my car inspected? Looking for somewhere that's going to be honest with me... And reasonably priced to fix anything wrong. Help!JT G. replied:Www.facebook.com/freedommotorworx message the page can look it over no problem
-
Referral from
January 16, 2017
Joseph D. asked:I need a 5" diameter by 4" long silicon coupler. I genuinely can only find reducers in that size, or a foot of it for 100 bucks, neither of witch I'm interested in. Anyone have such a piece, or know where I can get one? Pfa.JT G. replied:Message my shop page www.facebook.com/FreedomMotorworx
-
Referral from
January 16, 2017
Austin C. asked:Anyone know a good shop in sevierville or anyone good with Ford 4.6l motorsJT G. replied:Www.facebook.com/freedommotorworx I can help for sure
-
Referral from
December 21, 2016
Cortney K. asked:Best place to have a clutch installed in an 06 Wrangler? We've got the kit. Just need it installed.JT G. replied:Www.facebook.com/FreedomMotorworx message us
-
Referral from
December 20, 2016
Joe R. asked:Anyone local to Knoxville that can tune a srt4?? Let me know thanksJT G. replied:Www.facebook.com/freedommotorworx
-
Referral from
December 9, 2016
Dustin C. asked:Anyone on here a tech for Honda?JT G. replied:Www.facebook.com/FreedomMotorworx message the shop page
-
Referral from
December 2, 2016
Kalan D. asked:Who can replace the clutch in my 87 prelude?JT G. replied:www.facebook.com/freedommotorworx we can when you need it done message the shop
-
Referral from
November 28, 2016
Andres M. asked:Anyone on here that knows how to put a clutch on a 02 civic?JT G. replied:Message the shop page www.facebook.com/FreedomMotorworx
-
Referral from
November 26, 2016
Stephen B. asked:Recommendations for flywheel resurfacing in Knoxville? TIA. PFAJT G. replied:message the shop page www.facebook.com/freedommotorworx
-
Referral from
November 23, 2016
Colin B. asked:ISO Professional engine swapping techs and shops, the time span is sometime in the spring, preferably local to Knox area. Car: 1978 Toyota Cressida MX32 Engine: 1JZ non-VVTI Trans: R154 I want a quote and amount of time you'll need the car to do the swap, I'll provide as much as is needed as possible. thanks.JT G. replied:www.facebook.com/freedommotorworx
-
Referral from
November 21, 2016
Jesse A. asked:Do we have a local Dinan dealer? I need some work done and LNS/Knoxville performance has proven themselves to be incredibly unreliable.JT G. replied:Only Dinan dealer I know is LNS but welcome to message my shop www.facebook.com/freedommotorworx see what I can do
-
Referral from
November 18, 2016
Brian M. asked:What's a good place to get all this done? and they have to be ASE certified.JT G. replied:www.facebook.com/freedommotorworx i am a ase master tech, ase auto diesel certified, and ase under car specialist
-
Referral from
November 4, 2016
Jonathon D. asked:Any reputable Honda techs on here? With vtc actuator experience?JT G. replied:Www.facebook.com/FreedomMotorworx message the page
-
Referral from
October 29, 2016
Allen T. asked:audi a4 help FREE - Chuckey, TN (37641) I'm wanting to drop a another engine in my car in the coming months where's a good dependable shop that could do this for me? And could possibly find an engine to replace the one in my car. It's a 2002 Audi A4 3.0 QuattroJT G. replied:Www.facebook.com/FreedomMotorworx
-
Referral from
October 16, 2016
Mike C. asked:Looking for a reputable shop to do a timing chain and tensioner on a 04 RSX Type S.JT G. replied:Www.facebook.com/freedommotorworx message the shop page I do these very often
-
Referral from
August 28, 2016
Lauren E. asked:Who on here can install my exhaust system for me? Header and all. And not for an arm and leg. Pic for attention.JT G. replied:Www.facebook.com/freedommotorworx come see us
-
Referral from
February 3, 2018
Justin H. asked:Looking for a reliable shop in Knoxville to get my engine rebuilt that’s not gonna cost an arm and a leg?David F. replied:Freedom Motorworx & Fabrication JT Grail and Michael Smith
-
Referral from
March 19, 2017
David M. asked:Anybody on here ever built any hood stacks? Looking for or looking to get one made for a 2nd gen and hx40 flange pic for attentionDavid F. replied:JT Grail Come see us Freedom Motorworx & Fabrication
-
Referral from
September 24, 2016
Zach D. asked:looking for a reliable shop to swap a 2jz or ls into my jeep $9,999,999,999 - Knoxville, TN (37924)David F. replied:https://m.facebook.com/freedommotorworx/
-
Referral from
November 21, 2017
Christopher R. asked:Where’s the best place to have a ECU socketed/ have a Hondata S300 v3 installed?Matthew P. replied:JT Grail www.facebook.com/freedommotorworx and he can Dyno tune it as well
-
Referral from
October 30, 2017
Jamie L. asked:I'm looking for a mechanic that knows alot about our baby. We've done took one car to a dealership to get fixed and really not trying to go down that road with this one... Thank you guys for any info. We really hate seeing her like this... Chrysler 300c hemi.Matthew P. replied:JT Grail can fix it www.facebook.com/freedommotorworx
-
Referral from
May 22, 2017
Tyler A. asked:Iso mechanic $84,640,464 - Maryville, TN Need someone to swap a transmission asap cash in hand 95 civicMatthew P. replied:JT Grail can do it, message his shop page www.facebook.com/freedommotorworx
-
Referral from
April 20, 2017
Chris C. asked:Does anybody know if there are any Liqui Moly dealers in the area?Matthew P. replied:JT Grail at www.facebook.com/freedommotorworx can get it
-
Referral from
April 17, 2017
Ashley M. asked:Who can put breaks on the rear and rotate the rotors and look at the emergency break on my 2011 jeep wrangler Rubicon. Its a manual and the dodge dealership said something about my emergency break, but it works, atleast to me, so I don't know what they're talking about. I need prices please, dodge was wanting over 300 dollars.... NopeMatthew P. replied:JT Grail www.facebook.com/freedommotorworx
-
Referral from
February 28, 2017
Andrew G. asked:Anyone recommend a good honda mechanic? I'm tired of messing with my accord...Matthew P. replied:JT Grail at www.facebook.com/freedommotorworx is the Honda master
-
Referral from
December 10, 2016
Jay S. asked:Best place to get an exhaust installed in or around knoxville. Willing to travel a bit for a good price. Kinda on a budget. Pfa.Matthew P. replied:JT Grail at www.facebook.com/freedommotorworx
-
Referral from
November 30, 2016
Zach D. asked:Who can install a clutch kit on my d15b?Matthew P. replied:JT Grail can and he's donating a portion of his labor rates to help with the Gatlinburg fire disaster www.facebook.com/freedommotorworx
-
Referral from
November 7, 2016
Mark M. asked:wrx $1 - Decatur, TN (37322) Anyone know where I could find a 2.0 motor and or someone to drop it in the car had Subaru put a motor in it a year ago time for a new oneMatthew P. replied:JT Grail can do the swap. www.facebook.com/freedommotorworx
-
Referral from
October 31, 2017
Jordan W. asked:I need electrical and dyno work done on a 1996 LT1 stroker car anyone got any recommendationsCorey W. replied:Freedom Motorworx & Fabrication Message the shop page for quicker response.
-
Referral from
October 23, 2017
Hali M. asked:Anyone have a recommendation to a auto repair shop in west Knoxville that is really reliable we already have a diagnostic and they are wanting to charge 2,0000. Let me know what you got!Brian T. replied:https://www.facebook.com/freedommotorworx/
Recommendations from JT G.
Recommendations from David F.
Recommendations from Matthew P.
Recommendations from Corey W.
Recommendations from Brian T.
New Review
Please wait....
Please wait...
