Any recommendations for a good auto body shop? Hey everyone. I have to repair my car's fender and bumper (nothing serious) and I was wondering if any of you had any recommendations for a trustworthy body shop that won't unnecessarily keep my car for a month?
I have a '14 Focus and I need to repair this thing so I can sell it and get rid of it. Dealership wants to charge me $700 for the minimal repair so I figured I'd ask for help here.
Thanks!
OutlookOctopus replied:
That seems like a good price to me too. However, if you're a little handy you could look up your color on [pullapart.com](https://pullapart.com) and install a new bumper yourself.
Wondering if there is anyone in the area who does work or knows who works with plexiglass, either repairing it or making a new molded pice? I have a brake light cover that is cracked and has a hole. I've contacted the manufacturer and they don't have replacement parts.
ISO intake manifold for 92 gel tracker
$1,234 - Thorntown, IN (46071)
Looking for intake manifold or if someone knows where to get one please let me know thanks
Shawn S. replied:
Get one from Pull-A-Part in Indy but you'll have to pull one out yourself. http://www.pullapart.com
Ok guys does anyone know where I can buy a fender for a hombre I've found my grill but I'm looking to buy a driver fender for mine does anyone know a site ?
Pfa
Does Anyone Know Where I Can Find Parts For My Jeep Liberty. I Need Complete Back End. (Back hatch , Bumper , Fenders , Etc) PLEASE LET ME KNOW!! TIA Pictures In Comments
I've got body parts to replace on a Cherokee XJ - full driver fender, driver door. Where are good places to look? Thanks in advance..
Ric B. replied:
Look on Craig's List for part outs. Pull A Part has several XJs most of the time. That's where I pulled my passenger doors from. http://www.pullapart.com/
It seems like someone posted recently about looking for a good pull apart in the area, but for some reason the post is gone and I cannot refer back to it, so I'll ask again!
Does anyone have one they recommend?
Thanks!
Patrick C. replied:
I go to the pullapart in west nashville... very clean and organized. Pullapart.com
What's the cheapest place to get a battery for my 89 YJ? I don't care about the best battery, I'll get that someday. For now I'm just looking to get this thing rolling on the cheapest budget possible.
Pic for attention. I know I won't be getting that.
Seth P. replied:
$25 www.pullapart.com Make sure you have them test it right in front of you. And know what the size and numbers on a battery mean. I've bought several from there over the years.
Kyle A. replied:
Definitely check pull-a-part.. I've found batteries there that were only a month old..
Anybody know where I can get parts for an 04 Honda Civic LX? I need the middle dash with all the controls for AC + Turning Signals and a front passenger window
Does anyone know of any places that buy scrap vehicles? Let me know! Thanks!
Aaron T. replied:
Josh Brown your best bet would probably go to pull a part in Cleveland best pricing on parts. You can go to pullapart.com to check their inventory and parts pricing
to my FB mechanic friends...looking for a transmission for a 2002 Mercury Mountaineer, V8.....anyone have any leads n as to how much one would cost???? PM me plz OR TXT ME 270-789-8125
Scott C. replied:
www.pullapart.com › Locations Louisville Pull-A-Part - 6825 Recovery Rd Louisville, Kentucky 40214. Find & pull your used auto parts yourself.
I live in Brooklyn, NY, and my v/238K will not pass inspection oil pressure needs struts and new front tires brakes lite is on front alignment air bags were stolen Can you help me find a new ride?...
Can anyone recommend a local junkyard where I could find a radio from an 04-07 Durango?
Stephen R. replied:
I've been pretty happy with the Pull A Part yard in Baton Rouge. They have one in New Orleans as well and they even keep an inventory of their cars online. www.pullapart.com
Barry C. replied:
Farrar - there's a Pull-a-Part on Peters Road on the west bank, try them first. Bring your own tools and there is a small entrance fee ($2?).
Lewis D. replied:
I had good experiences with Pull-A-Part too; just be prepared to carry in all the tools you need for your procedure. (also don't know what the chances are of actually finding that radio intact, but Pull-A-Part will tell you whether the vehicle is in the lot.)
Can anyone recommend a good mechanic around Decatur? Just moved here and I may need some work done soon.
Also, are there any good pull-a-part yards nearby?